Bluetooth Mesh Wireless Control
Dali Receivers
Receivers. This is the part of the system that controls your Dali lighting. Either as part of an existing Dali system.
​
Or as a new Dali system. Receiving a signal from the App, wall switch or even your voice.
​
These receivers require a mains (240v) input.
​
TEQ-SB2421
240v Mains Dali Dimmable
For use on a NEW Dali system
The Dali dimmable receiver offers dimming control of up to 21 Dali LED Drivers.
Using Dali technology to give the best possible dimming.
This receiver is to be used where there is NOÂ
existing Dali infostructure. This unit will power the Dali information highway.
​
Fully addressable for Broadcast, Group or individual address. Simply pared to our wall switch. There is no requirement for a Dali engineer to commission. Saving time and money.
​
With Enclosure: This ideal to go into the ceiling void or any other location. Covered by wiring regulations so there are no electrical terminal on show.
TEQ-SB2421
​
Ideal for Domestic, Retail, commercial or hospitality environments.
​
For use on an EXISTING Dali system
15v Dali dimmable
TEQ-SB2411
The Dali dimmable receiver offers dimming control of up to 21 Dali LED Drivers.
Using Dali technology to give the best possible dimming.
This receiver is to be used where there is anÂ
existing Dali infostructure. This unit will be powered the Dali information highway.
​
This is ideal for adding a new office to a room. You can then control the Dali lights within the room from a wall mount switch. The Building BMS will still control the entire Dali network.
​
Fully addressable for Broadcast, Group or individual address. Simply pared to our wall switch. There is no requirement for a Dali engineer to commission. Saving time and money. > 19 x TEQ-2411 can be used on a Dali highway.
​
Without Enclosure: This will be required to fitted inside an enclosure to comply with building regulations.Â
TEQ-SB2411
​
Ideal for Retail, Commercial or Hospitality environments.
​