Bluetooth Mesh Wireless Control
Constant Current Receiver
This type of receiver is normally required for LED marker lights or Low Voltage lighting.
Receivers. This is the part of the system that controls your LED lighting. Receiving a signal from the App, wall switch or even your voice. These receivers require a 240v input. But the output is switchable from 350mA - 1050mA.
​
240V Constant Current output. Dimmable
TEQ-SB9105-50CC250-1000
This 240v voltage dimmable receiver offers dimming control of Constant Current LED.
This receiver can also be set to switching mode for non dimmable LED.
​
With Enclosure: This ideal to go into the ceiling void or any other location. Covered by wiring regulations so there are no electrical terminal on show.
TEQ-SB9105-50CC250-1000
​
The receiver can be switched between 350mA to 1050mA. Depending on your LED requirements. The maximum forward voltage is 56 volts.
Please check the specifications sheet of your light fixture to select the correct output and number of fixtures used per receiver
​