Bluetooth Mesh Wireless Control
Constant Voltage Receivers
This type of receiver is normally required for LED tape or Low Voltage lighting.
Receivers. This is the part of the system that controls your Low Voltage lighting. Receiving a signal from the App, wall switch or even your voice. These receivers require a Low Voltage input. 12v,24v 36v or 48v.
​
12v, 24v Single colour. Dimmable
TEQ-SB9101CS
This Low voltage dimmable receiver offers dimming control of up to 200 watts of LED.
Controlling a single colour LED strip.
This receiver can also be set to switching mode for non dimmable LED.
​
With Enclosure: This ideal to go into the ceiling void or any other location. Covered by wiring regulations so there are no electrical terminal on show.
TEQ-SB9101CS
​
This is powered by a 12v or 24v transformer. Depending on your LED requirements.Â
Please check the specifications sheet for the maximum wattage per voltage used.
​
12v, 24v, 36V Dimmable & Colour changingÂ
This Low voltage dimmable receiver offers dimming control of LED strip.
​
Controlling a single colour, RGB, RGBW, RGBWW RGBCCT or CCT LED strip.
This receiver can also be set to switching mode for non dimmable LED.
​
With Enclosure: This ideal to go into the ceiling void or any other location. Covered by wiring regulations so there are no electrical terminal on show.
TEQ-SB1029-5C
​
This is powered by a 12v,24v,36v or 48v transformer. Depending on your LED requirements.Â
Please check the specifications sheet for the maximum wattage per voltage used.
​
TEQ-SB1029-5C
12v, 24v, 36V or 48v Dimmable & Colour changingÂ
TEQ-SB9101-EA5C
This Low voltage dimmable receiver offers dimming control of LED strip.
​
This is our largest output receiver for longer runs of LED tape.
​
Controlling a single colour, RGB, RGBW, RGBWW RGBCCT or CCT LED strip.
This receiver can also be set to switching mode for non dimmable LED.
​
With Enclosure: This ideal to go into the ceiling void or any other location. Covered by wiring regulations so there are no electrical terminal on show.
TEQ-SB9101-EA5C
​
This is powered by a 12v,24v,36v or 48v transformer. Depending on your LED requirements.Â
Please check the specifications sheet for the maximum wattage per voltage used.
​