Bluetooth Mesh Wireless Control
240v Receivers
Receivers. This is the part of the system that controls your lighting / windows and relays. Receiving a signal from the App, wall switch or even your voice. These receivers require a mains (240v) input.
​
240v Mains Dimmable
The mains dimmable receiver offers dimming control of up to 200 watts of LED.
Using Trailing edge technology suitable for most LED applications.
​
We offer 2 types:
​
With Enclosure: This ideal to go into the ceiling void or any other location. Covered by wiring regulations so there are no electrical terminal on show.
TEQ-SB9040A-S-EN
​
Non enclosure: To be used as a retro fit. This unit needs to sit in a wall back box or an enclosure where a tool is required to gain access due to the exposed terminals.
TEQ-SB9040A
​
240v Mains relay
The mains dimmable receiver offers On/OFF relay control of up to 300 watts of LED lighting or >1.4A Inductive loads (Wire wound) or > 4.8a Resistive load (Electronic)
Ideal for garden pumps, water features or non dimmable loads.
​
We offer 2 types:
​
With Enclosure: This ideal to go into the ceiling void or any other location. Covered by wiring regulations so there are no electrical terminal on show.
TEQ-SB9100A-S-EN
​
Non enclosure: To be used as a retro fit. This unit needs to sit in a wall back box or an enclosure where a tool is required to gain access due to the exposed terminals.
TEQ-SB9100A
​
240v Mains Window treatments
The mains window treatment receiver allows for window treatments (Blinds, Curtains window openers) to be controlled via the same wireless system.
Â
The window treatments MUST BE 240V. THEY ALSO MUST NOT BE CONTROLLED IN ANY OTHER WAY. (Manufactures remotes etc)Â
​
We offer 1 type:
​
Non enclosure: This unit will need to sit in a wall back box or an enclosure where a tool is required to gain access due to the exposed terminals.
TEQ-SB9080A
​